Moaz bé bé Baby Bottles Warmer, Sterilizer And Dryer MB-011

Information of MB 011 Baby Bottles Warmer, Sterilizer And Dryer

Moaz Bébé MB-011 Baby Bottles Warmer, Sterilizer And Dryer is an extremely convenient product for the first stage of baby care. Versatile product with 4 uses: steam sterilization, drying, warming milk, defrosting, convenient for moms to clean bottles, accessories, or warm milk ready for baby’s delicious meal. The process of combining steam sterilization and drying at the same time helps to keep the baby’s bottles in a clean state, preventing bacteria from entering. The machine has a large storage compartment, so moms can sterilize many bottles and accessories at the same time.

Structure of Baby Bottles Warmer, Sterilizer And Dryer

Product MB – 011 has the following structure:

• The top cover is made of PP plastic
• The handle cover is made of PP plastic
• The middle layer is made of PP plastic
• The body is made of PP plastic
• Top cover of the bottom
• Control screen
• Machine base
• 304 . stainless steel heating tray
• Silicone seal ring

Specifications of Moaz MB 011 . Baby Bottles Warmer, Sterilizer And Dryer

– Heating capacity: 600W

– Drying capacity: 180W

– Voltage: 220V / 50Hz.

– Dimensions: 270 x 180 x 380 mm

– Warranty 12 months error 1 to 1 exchange when there is a fault caused by the manufacturer.

Uses and effects of Baby Bottles Warmer, Sterilizer And Dryer

The functions of the machine include: Sterilization – Drying, Independent sterilization with steam; independent drying; warm milk; defrost.

Thanks to the sterilization – drying feature, parents can easily kill bacteria and mold on their baby’s pacifier bottles.

The milk warming function helps mothers warm baby’s milk to the correct temperature, safely, and saves time.

The independent drying function helps keep baby items dry and prevents bacteria from growing.

Standard temperature controller

Heating water temperature, even heat.

Advantages of Baby Bottles Warmer, Sterilizer And Dryer

• The case is made of durable, waterproof, anti-deformation and completely non-toxic plastic that affects consumers’ health. The spacious machine compartment can hold many different sized milk bottles at the same time.
• Closed, clean sterilization and drying process; spacious engine compartment holds 6-8 bottles of milk; In addition, the stand can be used to place baby’s nipples, bowls and spoons.
• Sterile storage for up to 5 hours.
•  Warming – defrosting milk only takes 10-15 minutes to have a warm, delicious milk bottle for your baby.
• The body fits all wide neck bottles.
• The option of independent sterilization or independent drying on demand saves time for moms.
• Easy to clean and wash.

Instructions for using the Moaz MB 011 Baby Bottles Warmer, Sterilizer And Dryer

Product operating principles:

1. Start button: Control the status of the device, after plugging in the power source, gently press the display screen once; Control the working state, please select the function, then press once to start.
2. Cancel – Huy button: Controls the operating status, while in operation, lightly pressing this button once can cancel the device’s operating function.
3. Menu button – function: Select the corresponding function: there are 5 functions of sterilization + drying, sterilizing, drying, warming milk, warming food.

Independent sterilization function:

– Take out the cover on the face, middle layer, body and center of the body of the sterilizer.

– Add 120ml – 150ml of water into the storage compartment then place the items to be sterilized into the machine body, middle layer.

– Plug in the power source, press the start button, then press the Menu function button once, the light shows the sterilization function, after 5 seconds or press the start button, the device starts to perform the independent sterilization function.

Independent drying function:

– Take out the cover on the face, middle layer, body and center of the body of the sterilizer.

– Place the machine body on the main body, place the milk bottle face down in the body.

– Plug in the power source, press the start button then press the Menu function button twice, the light shows the Dry function, after 5 seconds or press the start button, the device starts to perform the independent drying function. The drying time can be changed with the +/ – buttons.

– The drying function is completed, the device emits a sound, the indicator light turns off, open the lid, wait for the bottle, bottle nipple, and bottle cap to cool, then take them out from the body and middle layer of the bottle, one by one. device.

Sterilization + Drying function:

– Take out the cover on the face, middle layer, body and center of the body of the sterilizer.

– Put 120ml – 150ml of water into the container, then put the items to be sterilized and dried into the body and middle layer.

– Plug in the power, press the start button then press the Menu function button 5 times, the light shows the sterilization function, the Sterilize Dry button lights up, after 5 seconds or press the start button the device starts to perform the sterilization function. dried insects. The time can be adjusted by pressing the up/down button.

– After sterilization is complete, the device automatically switches to the drying mode, the default drying time is 40 minutes. While drying, the indicator light remains on.

– After completing the drying function, hear the signal sound, the indicator light goes off, open the lid, wait for the milk bottle, bottle knob, and bottle cap to cool, then remove from the body and middle layer one by one. .

Defrost function:

– Place the milk that needs to be defrosted into the machine body.

– Put 100ml – 150ml of water into the tank then place the machine body on the main body.

– Plug in the power source, press start then press the Defrost function, after 5 seconds or press the start button the device will start the defrost function. The default temperature is 40 degrees Celsius, the temperature can be adjusted from 35 to 70 degrees Celsius.

– After performing the defrosting function, the device beeps, open the lid to get milk.

Milk warming function:

– Add 100 – 150ml of clean water to the machine, place the body on the main body.

– Take out the round plastic piece, put the milk bottle in, then close the lid.

– Plug in the power source, press the start button, then press the Warm milk function to wait for 5 seconds or press the start button again to start the warming function. Default temperature is 40 degrees Celsius. Temperature can be adjusted from 35 – 55 degrees Celsius. The machine will maintain the set temperature for 12 hours.

– After reaching the set temperature, the device beeps, open the lid to take out the bottle.

Note to use the product safely

• Before sterilizing and drying baby bottles, please wash them thoroughly.
• Be careful with the milk bottle after heating, do not directly contact with your hands, avoid burns.
• For exposed parts when sterilizing, please face down to avoid water accumulation during sterilization.
• Before removing the cover, please be careful, hot steam may escape from the top cover.
• When placing items into sterilization, make sure the item can withstand a temperature of 100 degrees Celsius, to avoid the product deforming or producing toxic substances.

Where to buy a dryer to Baby Bottles Warmer, Sterilizer And Dryer

Parents who want to buy a sterilizer and dryer for milk bottles but are still wondering where to buy reputable quality products, please order at the information below.

• Official website of Moaz BéBe:  https://moazbebe.com/
• Genuine Fanpage of Moaz BeBe: https://www.facebook.com/MoazbebeVietNam

Thank you parents for caring and following the article. Refer to the MB – 011 machine to take care of the health of your baby and parents.