Moaz BeBe Travel Electric Kettle MB – 107

Temperature Settings of the MB-107 Travel Electric Kettle:

• 100°C Setting: After reaching 100°C, the kettle continues dechlorination for an additional 2 minutes. When kept plugged in, the water will gradually cool down to 55°C and then be kept warm at this temperature for up to 8 hours.
• 70°C Setting: Once the water reaches 70°C, the kettle will maintain this temperature for up to 8 hours when plugged in.
• 55°C Setting: After reaching 55°C, the kettle will keep the water warm at this temperature for up to 8 hours while plugged in.
• 40°C Setting: Once the water reaches 40°C, it will be maintained at this temperature for up to 8 hours when the kettle remains plugged in

Notes:

• When setting the temperature to 40 – 55 – 70°C, it is recommended to use pre-boiled water or purified water for reheating.
• 40°C is suitable for preparing formula, while 70°C is ideal for making tea or coffee.
• For the first three uses, fill the kettle with water up to (but not exceeding) the MAX level, boil it, then discard the water to remove any initial odor from the product.

User Guide for Moaz BéBé MB-107 Travel Electric Kettle:

• To use the MB-107, plug it in. You will hear a beep, then press the single button on the kettle body to adjust the temperature. Each press cycles through different temperature settings, indicated by the light.
• If no further action is taken, after 3 seconds the kettle will automatically start operating. A beep sound and flashing light will indicate that heating has begun.
• Once the selected temperature is reached, the kettle will beep 3 times and switch to keep-warm mode for up to 8 hours while plugged in. At this time, the indicator light will remain steady.
• To continue using or reheat water at a previously selected temperature, wait until the water cools down before pressing the button again.
• During boiling, the lid can be kept closed.
• After the water has boiled, wait about 3 minutes before opening the lid to avoid high internal pressure and prevent hot water from splashing out, which may cause injury.

Important Notes for Use:

When using the MB-107 Travel Electric Kettle, please pay attention to the following:

• Before connecting to a power source, check whether the voltage matches the rating on the product. If not, do not use it and contact your nearest dealer.
• Do not plug or unplug the power cord with wet hands to avoid electric shock or injury.
• Do not excessively bend, twist, pull, or press the power cord. Keep it away from high heat sources and sharp objects. Do not replace the power cord yourself.
• For safety, do not modify, disassemble, or repair the product without authorization. Prevent metal wires, plates, or foreign objects from entering connectors.
• Do not immerse the appliance in water or any other liquid.
• This product must be properly grounded and connected to a grounded power outlet.
• Place the kettle on a flat, stable surface to prevent movement or accidents caused by pulling the cord.
• Do not drop or удар the product, as this may cause electric shock, damage, fire, or other hazards.
• If abnormal noise, overheating, or smoke occurs during use, stop using immediately and contact customer service for timely repair.
• A slight odor may be present during first use; this is normal and will disappear over time.
• Unplug the power cord before cleaning or when not in use.
• Do not overfill the kettle. Overfilling may cause boiling water to overflow, which is dangerous.
• If the power cord is damaged, it must be replaced with a cord or parts provided by the manufacturer or service center.
• If placing the product on wooden furniture, use a protective layer between the kettle and the surface.
• To avoid burns, ensure the lid is tightly closed before use.
• If the kettle overheats due to lack of water, the internal temperature control system will automatically shut off the power for safety. It can be used again only after it cools down.